View VFR1107B_4103962.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Product features
Package Product features PLCC-4 Bathtub Type. Water clear epoxy Outer Dimension 3.5 x 2.8 x 1.9mm( L x W x H ) Wide operation temperature range Storage Temperature : -40 110 Operating Temperature :-40 100 Operation Guarantee Ramification of luminosity group sorting. It is possible to have a uniform transmission with little irregularities even when several are lined up. Systematization of luminosity groups and color tone groups. Unified to a simple standard. Corresponding to a use requiring high reliability in cars etc... Through heat dissipation design, a maximum forward current of IF=30mA(InGaN), IF=70mA(AlInGaP) is made possible, and a high luminosity is then possible. Spatial distribution characteristics. ( : 120deg) No lead package and lead-free soldering compatible RoHS compliant Blue Green Yellow-Green Yellow Orange Red 120 deg. VUB,VUG : InGaN VUB VUG VYBG VYPY : : : : VYBG, VYPY, VFY, VFA, VFR :AlGaInP VFY : VFA : VFR : 14.3 lm/W 14.3 lm/W 12.9 lm/W : : : : : : 469nm (VUB) 528nm (VUG) , 560nm(VYBG) 573nm (VYPY) 589nm (VFY) 606nm (VFA) 633nm (VFR)
Dominant wavelength
Spatial distribution Die materials Optical efficiency
4.3 lm/W 17.1 lm/W 1.8 lm/W 6.8 lm/W
Rank grouping parameter Assembly methods (customer) Soldering methods Taping dimensions ESD
Sorted by luminous intensity and wavelength and taped according to rank. Corresponding to surface mounter. Corresponding to reflow soldering and manual soldering. 2,000pcs(standard)per reel in a 8mm width tape. Reel diameter: 180mm AlInGaP:2kV (HBM) InGaN:1kV (HBM)
Recommended Applications
SW lighting for car indicators, meter panel, car audio and heater control, etc...
2005.3.31 Page 1
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Color Variations and Luminous Intensity
Dominant Wavelength (nm)
TYP. IF MIN.
Part No.
Material
Emitted Color
Lens Color
Luminous Intensity Iv (mcd)
MAX. IF
Luminous Flux (mlm)
TYP. IF
VUB1107B VUG1107B VYBG1107B VYPY1107B VFY1107B VFA1107B VFR1107B
InGaN InGaN
Blue
469 528
30 30 50 50 50 50 50
56 150 27 100 270 390 180
220 560 100 330 820 1,000 560
30 30 50 50 50 50 50
450 1,800 200 750 1,500 1,500 1,350
30 30 50 50 50 50 50
Green AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP YellowGreen Yellow Orange Red Water Clear 560 573 589 606 633
Note : The luminous intensity(Iv) and dominant wavelength( values of the sorting machine. ... 1nm) (Tolerance : IV... 10%,
) above are the setup
2005.7.6
Page 2
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Absolute Maximum Ratings
Absolute Maximum Ratings VUB 120 30 100 0.6 2.0 VR Topr Tstg 5
2 2
Item Power Dissipation Forward Current Pulse Forward Current 1 Derating (Ta=65 or higher) Reverse Voltage Operating Temperature Storage Temperature
Symbol Pd IF IFRM
VUG 120 30 100 0.6 2.0 5
2 2
VYBG 196 70 100 1.27 1.82 5
VYPY 196 70 100 1.27 1.82 5 -40 -40 +100 +110
VFY 196 70 100 1.27 1.82 5
VFA 196 70 100 1.27 1.82 5
VFR 196 70 100 1.27 1.82 5
Unit mW mA mA mA/ mA/ V
1 IFRMMeasurement condition : Pulse Width 1ms., Duty 2 Temperature Condition: Ta=60 or higher.
1/20.
Thermal Characteristics
Ratings VUB 110 VUG 110 VYBG 120 VYPY 120 VFY 120 VFA 120 VFR 120
Item Junction Temperature (MAX.) Thermal Resistance (TYP.)
(Junction/ Solder Point)
Symbol
Unit
Tj
R(th J-S)
220
220
280
280
280
280
280
/W
Rth(J-S) Measurement Condition / Substrate: FR4(t=1.6mm) Pattern Size: 16mm2.
2004.9.29
Page 3
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Electro-Optical Characteristics VUB,VUG)
Item Conditions TYP. Forward Voltage IF=30mA VF MAX. Reverse Current Peak Wavelength Dominant Wavelength Spectral Line Half Width Half Intensity Angle VR =5V IF=30mA IF=30mA IF=30mA IF=30mA IR MAX. TYP. TYP. TYP. TYP. 4.0 100 464 469 26 120 4.0 100 516 528 36 120 nm nm nm deg. Symbol Characteristic Ratings VUB 3.5 VUG 3.5 V Unit
Note: The dominant wave length ( Tolerance: ... 1nm
) above is the setup value of the sorting machine.
Electro-Optical CharacteristicsVYBG, VYPY, VFY, VFA, VFR)
Item Conditions IF=50mA Symbol TYP. Forward Voltage VF MAX. Reverse Current Peak Wavelength Dominant Wavelength Spectral Line Half Width Half Intensity Angle VR =5V IF=50mA IF=50mA IF=50mA IF=50mA IR MAX. TYP. TYP. TYP. TYP. 2.6 100 567 560 16 120 2.6 100 577 573 16 120 2.6 100 594 589 15 120 2.6 100 611 606 15 120 2.6 100 636 633 15 120 nm nm nm deg. Characteristic Rating VYBG 2.2 VYPY 2.2 VFY 2.1 VFA 2.1 VFR 2.1 V Unit
Note: The dominant wave length ( Tolerance: ... 1nm
) above is the setup value of the sorting machine.
2004.06.23
Page 4
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Luminous Intensity Rank Standard ChartUnit: mcd
Rank B2 B3 B4 B5 B6 B7 B8 B9 BX BY BZ C1 C2 C3 C4 C5 C6 C7 C8 C9 CX CY CZ D1 D2 D3 D4 D5 I V mc d MIN. MAX. 12 15 15 18 18 22 22 27 27 33 33 39 39 47 47 56 56 68 68 82 82 100 100 120 120 150 150 180 180 220 220 270 270 330 330 390 390 470 470 560 560 680 680 820 820 1,000 1,000 1,200 1,200 1,500 1,500 1,800 1,800 2,200 2,200 2,700
VUB VUG VYBG VYPY VFY VFA VFR
IF=30mA
IF=50mA
B6
BX BZ C1 C3 C4 C6 C6 C8 C9 CY CZ C9 C4
Limited width of luminous intensity rank is from Min.4 rank width.
2005.7.6
Page 5
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Color Tone Groups (
450nm
)
( unit: nm ) Tolerance: +/-1nm
VUB Type 470nm
VUB Type (IF=30mA) A B C D MIN. 460.0 464.0 468.0 472.0 MAX. 464.0 468.0 472.0 476.0 VUG Type (IF=30mA) A B C D MIN. 515.0 520.0 525.0 530.0 MAX. 520.0 525.0 530.0 535.0
500nm
VUG Type 525nm
550nm
VYBG Type 558nm VYPY Type 572nm
VYBG Type (IF=50mA) B C D MIN. 555.0 558.0 561.0 MAX. 558.0 561.0 564.0 VYPY Type (IF=50mA) A B C MIN. 567.0 570.0 573.0 MAX. 570.0 573.0 576.0 VFY Type (IF=50mA) D E F MIN. 586.0 589.0 592.0 MAX. 589.0 592.0 595.0 VFA Type (IF=50mA) C D E MIN. 603.0 606.0 609.0 MAX. 606.0 609.0 612.0 VFR Type (IF=50mA) A B C MIN. 620.0 626.0 632.0 MAX. 626.0 632.0 638.0
Limited width of luminous intensity rank is from Min.5 to Min.6 rank width. (It changes with product.)
Page 6
VFY Type 590nm
600nm
VFA Type 605nm
VFR Type 626nm
650nm
2005.7.6
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Characteristic Graph VUB,VUG)
Spectral Distribution
Relative Intensity vs. wavelength
1.2
Condition:IF=30mA Ta=25
Spatial Distribution Example
X-direction
VUB VUG
Condition: Ta=25
1.0
Relative Intensity
0.8
0.6
0.4
0.2
0.0 400 420 440 460 480 500 520 540 560 580 600 620
Wavelength[nm]
Forward Voltage vs. Forward Current
Condition: Ta=25
Forward Current vs. Relative Intensity
Condition: Ta=25
1.2
100
1.0
Relative Intensity
10
Forward Current I F (mA)
VUB,VUG
0.8
VUB,VUG
1
0.6
0.4
0.1
0.2
0.01 1.5 2.0 2.5 3.0 3.5 4.0 4.5
0.0 0 5 10 15 20 25 30 35 40
Forward Voltage : VF(V)
Forward Current : IF (mA)
2004.06.23
Page 7
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Characteristics ChartVUB,VUG)
Derating
Ambient Temp. vs. Maximum Forward Current
Repetition Frequencyf
120
Ambient Temp. vs. Relative Intensity
50Hz Condition:IF=30mA
10.0
Maximum Forward Current : I F MAX. (mA)
100
Duty=10%
80
Duty=20%
60
Relative Intensity
VUB,VUG
1.0
Duty=30% Duty=50%
40
DC
20
0 -40
0.1
-20 0 20 40 60 80 100 120
-40
-20
0
20
40
60
80
100
Ambient Temp. : Ta ()
Ambient Temp.: Ta (
)
Dynamic Drive Rating
Duty cycle vs. Maximum Forward Current
Pulse Width vs. Maximum Tolerable Peak Current
10
Ambient Temp. : Ta=25
100
Maximum Forward Current : IF MAX.(mA)
10
IF Peak MAX./IF DC MAX.
10kHz
1kHz
100Hz
1 1 10
Duty (%)
1
100
1
10
100
1000
)
10000
100000
Pulse Width : tw (
2004.06.23
Page 8
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Characteristics ChartVYBG,VYPY)
Spectral Distribution
Relative Intensity vs. wavelength
Condition:IF=50mA Ta=25
Spatial Distribution Example
1.2
X-direction
VYBG
1.0
Condition: Ta=25
VYPY
Relative Intensity
0.8
0.6
0.4
0.2
0.0 520 540 560 580 600 620
Wavelength[nm]
Forward Voltage vs. Forward Current
1000
Forward Current vs. Relative Intensity
Condition: Ta=25
2.0
Condition: Ta=25
Forward Current I F (mA)
100
Relative Intensity
1.5
VYBG VYPY
10
1.0
1
VYPY
VYBG
0.5
0.1
0.01 1.0 1.5 2.0 2.5 3.0
0.0 0 20 40 60 80 100
Forward Voltage : VF(V)
Forward Current : IF (mA)
2004.06.23
Page 9
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Characteristics ChartVYBG,VYPY)
Derating
Ambient Temp. vs. Maximum Forward Current
Repetition Frequencyf
120
Ambient Temp. vs. Relative Intensity
50Hz
10.0
Condition:IF=50mA
Maximum Forward Current : I F MAX. (mA)
100
Duty=10% Duty=20%
80
60
Duty=30% Duty=50%
Relative Intensity
1.0
VYBG
40
DC VYPY
20
0 -40
0.1
-20 0 20 40 60 80 100 120
-40
-20
0
20
40
60
80
100
120
Ambient Temp. : Ta (
)
Ambient Temp. : Ta (
)
Dynamic Drive Rating
Duty cycle vs. Maximum Forward Current
100
Pulse Width vs. Maximum Tolerable Peak Current
Ambient Temp. : Ta=25
10
Maximum Forward Current : IF MAX.(mA)
10
IF Peak MAX./IF DC MAX.
10kHz
1kHz
100Hz
1 1 10 100
1 1 10 100 1000 10000 100000
Duty (%)
Pulse Width : tw (
)
2004.06.23
Page 10
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Characteristics ChartVFY,VFA,VFR)
Spectral Distribution
Relative Intensity vs. wavelength
1.2
Condition:IF=50mA Ta=25
Spatial Distribution Example
X-direction
1.0
Condition: Ta=25
VFY
VFA
VFR
Relative Intensity
0.8
0.6
0.4
0.2
0.0 540 560 580 600 620 640 660 680
Wavelength[nm]
Forward Voltage vs. Forward Current
Condition: Ta=25
Forward Current vs. Relative Intensity
Condition: Ta=25
1000
2.0
Forward Current I F (mA)
100
Relative Intensity VFY,VFA,VFR
1.5
10
1.0
VFY,VFA,VFR
0.5
1
0.1 1.0 1.5 2.0 2.5 3.0
0.0 0 20 40 60 80 100
Forward Voltage : VF(V)
Forward Current : IF (mA)
2004.06.23
Page 11
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Characteristics ChartVFY,VFA,VFR)
Derating
Ambient Temp. vs. Maximum Forward Current
Repetition Frequencyf
120
Ambient Temp. vs. Relative Intensity
50Hz Condition:IF=50mA
10.0
Maximum Forward Current : I F MAX. (mA)
100
Duty=10% Duty=20%
80
60
Duty=30% Duty=50%
Relative Intensity
1.0
VFA VFR
40
DC VFY
20
0.1
0 -40
-40
-20 0 20 40 60 80 100 120
10
60
110
Ambient Temp. : Ta (
)
Ambient Temp. : Ta (
)
Dynamic Drive Rating
Duty cycle vs. Maximum Forward Current
100
Pulse Width vs. Maximum Tolerable Peak Current
Ambient Temp. : Ta=25
10
Maximum Forward Current : IF MAX.(mA)
10
IF Peak MAX./IF DC MAX.
10kHz
1kHz
100Hz
1 1 10 100
1 1 10 100 1000 10000 100000
Duty (%)
Pulse Width : tw (
)
2004.06.23
Page 12
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Package Dimensions
(Unit: mm) Weight: (36.5)mg Tolerance: 0.2
Recommended Soldering Pattern
(Unit: mm)
Taping Specification
Quantity: 2,000pcs/ reel (standard)
(Unit: mm)
2004.06.23
Page 13
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Reflow Soldering Conditions
1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6 maximum)
Manual Soldering Conditions
Iron tip temp. Soldering time and frequency 350 3s 1 time (MAX.) (MAX.) (MAX.)
2004.09.06
Page14
1107B Series
Single Color PLCC-4 Bathtub Type
(High Reliability type, V-Series)
Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products described in the data sheets are made to be used in standard electronic applications such as office automation appliances, communication devices, audio visual, home appliances, and measuring instruments. 5) If the products in the data sheets are to be used for purposes other than the above which requires high level reliability and safety where failure and or malfunction of the product may cause death or other serious effects on the human body such as airplane, space activity, transportation, medical, nuclear), please contact our sales personnel. 6) In order to export the products or technologies described in this data sheet which are under the "Foreign Exchange and Foreign Trade Control Law," it is necessary to first obtain an export permit from the Japanese government. 7) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 8) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com
2004.07.13
Page15

▲Up To Search▲

Price & Availability of VFR1107B

	To Download VFR1107B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .